Aj-antunes-co MS-250 9100439 User Manual download pdf (Page 5)

5

P/N 1010984 Rev. D 03/12

INSTALLATION

1. Remove the unit and all packing

materials from the shipping carton.

2. The unit should come with the items

listed below:

• Owner’sManual

• AuthorizedServiceAgencyDirectory

• InletHoseAssembly(MS-250only)

• SpatulaAssembly

NOTE: If any parts are missing or dam-

aged, contact A.J. Antunes IMMEDIATELY

at 1-800-253-2991 or 1-630-784-1000.

3. Remove all packing materials and pro-

tective coverings from the unit.

4. Remove and wash the Wire Trivet,

Spatula, Spatula Liner, and Drip Pan

(Figure 1) in soap and water. Rinse

with clean hot water and allow to air

dry.

5. Wipe all surfaces of the unit with a

hot, damp cloth.

NOTE: Do NOT use a dripping wet cloth.

Wring out before use.

6. Assemble the Guard and Mounting

Bolt to the Spatula (Figure 2).

7. Install the Wire Trivet into the side

slots on the Spatula (Figure 2).

8. Re-install all removed parts.

When placing the unit into service, pay atten-

tion to the following guidelines:

• Make sure power is off and the unit is

at room temperature.

• Do NOT block or cover any openings

on the unit.

• Do NOT immerse cord or plug in

water.

• Keep cord away from heated surfaces.

• Do NOT allow cord to hang over edge

of table or counter.

Spatula

Wire Trivet

Drip Pan

Spatula Liner

Figure 1. Washing Parts

Figure 2. Assembling Handle

Bolt

Handle

Spatula

Handle Guard

Wire Trivet

ELECTRICAL

Plug the power cord into the appropriate

power outlet. Refer to the specification plate

for the proper voltage.

1. Place the unit on a sturdy, level table

or other work surface.

2. Turn off the power.

3. Ensure that the line voltage corre-

sponds to the stated voltage on the

units specification label and power

cord warning tag. If you are unsure of

your Line Voltage, contact an electri-

cian.

4. Connect the unit to the power supply.

WARNING

Be sure to follow all the precautions, proce-

dures, and safety steps listed in the Important

Safety Information section of this manual.

WARNING

All electrical connections must be in accor-

dance with local electrical codes and any other

applicable codes.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments